Huawei S6700 Series

#
bgp 10
router-id 3.3.3.3
peer 1.1.1.1 as-number 10
peer 1.1.1.1 connect-interface LoopBack 0
peer 2.2.2.2 as-number 10
peer 2.2.2.2 connect-interface LoopBack 0
peer 4.4.4.4 as-number 10
peer 4.4.4.4 connect-interface LoopBack 0
#
ipv4-family unicast
undo synchronization
peer 10.1.4.2 enable
peer 10.1.2.1 enable
#
ospf 1
area 0.0.0.0
network 10.1.2.0 0.0.0.3
network 10.1.4.0 0.0.0.3
network 3.3.3.3 0.0.0.0
#
return
l Configuration file of Switch D
#
sysname SwitchD
#
vlan batch 30 40 50
#
router id 4.4.4.4
#
interface Vlanif30
ip address 10.1.4.2 255.255.255.252
#
interface Vlanif40
ip address 10.1.3.2 255.255.255.252
#
interface Vlanif50
ip address 10.2.1.1 255.255.255.252
#
interface LoopBack0
ip address 4.4.4.4 255.255.255.255
#
bgp 10
router-id 4.4.4.4
peer 10.2.1.2 as-number 20
peer 1.1.1.1 as-number 10
peer 1.1.1.1 connect-interface LoopBack 0
peer 2.2.2.2 as-number 10
peer 2.2.2.2 connect-interface LoopBack 0
peer 3.3.3.3 as-number 10
peer 3.3.3.3 connect-interface LoopBack 0
#
ipv4-family unicast
undo synchronization
import-route direct
import-route ospf 1
peer 2.2.2.2 enable
peer 1.1.1.1 enable
peer 5.5.5.5 enable
peer 3.3.3.3 enable
#
ospf 1
area 0.0.0.0
network 4.4.4.4 0.0.0.0
network 10.1.3.0 0.0.0.3
network 10.1.4.0 0.0.0.3
#
return
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 4 OSPF Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
172