Huawei S6700 Series Configuration Guide

bgp 65009
router-id 2.2.2.2
peer 3.1.1.2 as-number 65008
#
ipv4-family unicast
undo synchronization
summary automatic
import-route ospf 1
peer 3.1.1.2 enable
#
ospf 1
import-route bgp
area 0.0.0.0
network 9.1.1.0 0.0.0.255
return
l Configuration file of SwitchC
#
sysname SwitchC
#
vlan batch 20 40
#
interface Vlanif20
ip address 9.1.1.2 255.255.255.0
#
interface Vlanif40
ip address 9.1.2.1 255.255.255.0
#
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 20
#
interface XGigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 40
#
ospf 1
area 0.0.0.0
network 9.1.1.0 0.0.0.255
network 9.1.2.0 0.0.0.255
#
return
7.20.4 Example for Configuring BGP Load Balancing and the MED
Networking Requirements
As shown in Figure 7-7, all Switches run BGP. SwitchA resides in AS 65008. Both SwitchB
and SwitchC reside in AS 65009. EBGP runs among SwitchA, SwitchB, and SwitchC. IBGP
runs between SwitchB and SwitchC.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 7 BGP Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
459

Huawei S6700 Series Specifications

General

Brand	Huawei
Model	S6700 Series
Category	Switch
Language	English