EasyManua.ls Logo

Huawei S6700 Series

Huawei S6700 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Switch A XGE0/0/2 VLANIF 20 3.3.3.1/24
Switch B XGE0/0/1 VLANIF 30 2.2.2.2/24
Switch B XGE0/0/2 VLANIF 20 3.3.3.2/24
Switch B XGE0/0/3 VLANIF 40 172.16.1.1/24
Switch C XGE0/0/1 VLANIF 10 1.1.1.2/24
Switch C XGE0/0/2 VLANIF 30 2.2.2.1/24
Configuration Roadmap
The configuration roadmap is as follows:
1. Configure the basic OSPF functions on the Switch s.
2. Enable the BFD feature globally.
3. Enable BFD for OSPF on Switch A and Switch B.
Data Preparation
To complete the configuration, you need the following data:
l ID of the VLAN that each interface belongs to, as shown in Figure 4-13
l IP address of each VLANIF interface, as shown in Figure 4-13
l Router ID and OSPF process ID of each Switch and network segments that OSPF interfaces
belong to:
On Switch A, the router ID is 1.1.1.1; OSPF process ID is 1; the network segments of
Area 0 are 3.1.1.0/24 and 1.1.1.0/24.
On Switch B, the router ID is 2.2.2.2; OSPF process ID is 1; the network segments of
Area 0 are 3.1.1.0/24, 2.2.2.0/24, and 172.16.1.0/24.
On Switch C, the router ID is 3.3.3.3; the OSPF process ID is 1; the network segments
of Area 0 are 192.168.1.0/24 and 172.16.1.0/24.
l Minimum interval for sending the BFD packets, minimum interval for receiving the BFD
packets, and local detection time multiplier on Switch A and Switch B
Procedure
Step 1 Create VLANs and add corresponding interfaces to the VLANs.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan 10
[SwitchA-vlan10] quit
[SwitchA] vlan 20
[SwitchA-vlan20] quit
[SwitchA] interface XGigabitEthernet 0/0/1
[SwitchA-XGigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchA-XGigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchA-XGigabitEthernet0/0/1] quit
[SwitchA] interface XGigabitEthernet 0/0/2
[SwitchA-XGigabitEthernet0/0/2] port hybrid pvid vlan 20
[SwitchA-XGigabitEthernet0/0/1] port hybrid untagged vlan 20
[SwitchA-XGigabitEthernet0/0/2] quit
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 4 OSPF Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
180

Table of Contents

Other manuals for Huawei S6700 Series

Related product manuals