Huawei S6700 Series - Page 504

h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total Number of Routes: 1
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 172.16.1.0/24 200.1.2.2 150 0 200i
According to the BGP routing table, the standby link Switch A → Switch C → Switch B takes
effect after the active link fails. The next hop address of the route destined for 172.16.1.0/24
becomes 200.1.2.2.
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
router id 1.1.1.1
#
vlan batch 10 20
#
bfd
#
interface Vlanif10
ip address 200.1.2.1 255.255.255.0
#
interface Vlanif20
ip address 200.1.1.1 255.255.255.0
#
interface XGigabitEthernet0/0/1
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface XGigabitEthernet0/0/2
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
bgp 100
router-id 1.1.1.1
peer 200.1.1.2 as-number 200
peer 200.1.1.2 bfd min-tx-interval 100 min-rx-interval 100 detect-multiplier
4
peer 200.1.1.2 bfd enable
peer 200.1.2.2 as-number 200
#
ipv4-family unicast
undo synchronization
peer 200.1.1.2 enable
peer 200.1.2.2 enable
#
return
l Configuration file of Switch B
#
sysname SwitchB
#
router id 2.2.2.2
#
vlan batch 20 30 40
#
bfd
#
interface Vlanif30
ip address 9.1.1.1 255.255.255.0
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 7 BGP Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
485