EasyManua.ls Logo

Huawei S6700 Series

Huawei S6700 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Configure GTSM on Switch A, Switch B, Switch C, and Switch D.
Data Preparation
To complete the configuration, you need the following data:
l Route IDs of Switch A, Switch B, Switch C, Switch D and number of the AS where they
reside
l TTL values between Switch A and Switch B, between Switch B and Switch C, between
Switch C and Switch D, and between Switch B and Switch D.
Procedure
Step 1 Configure VLANs that interfaces belong to.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan batch 10
[SwitchA] interface xgigabitethernet 0/0/1
[SwitchA-XGigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchA-XGigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchA-XGigabitEthernet0/0/1] quit
The configurations of Switch B, Switch C, and Switch D are similar to the configuration of
SwitchA, and are not mentioned here.
Step 2 Assign an IP address to each VLANIF interface.
[SwitchA] interface vlanif 10
[SwitchA-Vlanif10] ip address 10.1.1.1 24
[SwitchA-Vlanif10] quit
The configurations of Switch B, Switch C, and Switch D are similar to the configuration of
SwitchA, and are not mentioned here.
Step 3 Configure OSPF.
The configuration details are not mentioned here.
Step 4 Configure an IBGP connection.
# Configure Switch B.
[SwitchB] bgp 20
[SwitchB-bgp] router-id 2.2.2.9
[SwitchB-bgp] peer 3.3.3.9 as-number 20
[SwitchB-bgp] peer 3.3.3.9 connect-interface LoopBack0
[SwitchB-bgp] peer 3.3.3.9 next-hop-local
[SwitchB-bgp] peer 4.4.4.9 as-number 20
[SwitchB-bgp] peer 4.4.4.9 connect-interface LoopBack0
[SwitchB-bgp] peer 4.4.4.9 next-hop-local
# Configure Switch C.
[SwitchC] bgp 20
[SwitchC-bgp] router-id 3.3.3.9
[SwitchC-bgp] peer 2.2.2.9 as-number 20
[SwitchC-bgp] peer 2.2.2.9 connect-interface LoopBack0
[SwitchC-bgp] peer 4.4.4.9 as-number 20
[SwitchC-bgp] peer 4.4.4.9 connect-interface LoopBack0
# Configure Switch D.
[SwitchD] bgp 20
[SwitchD-bgp] router-id 4.4.4.9
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 7 BGP Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
488

Table of Contents

Other manuals for Huawei S6700 Series

Related product manuals