Huawei SUN2000-17KTL - 6.3 Setting Initialization Parameters

SUN2000 (8KTL-28KTL)
User Manual
6 System Operation
Issue 12 (2019-06-30)
Copyright © Huawei Technologies Co., Ltd.
63
Step 2 Set the DC SWITCH at the bottom of the SUN2000 to ON.
Step 3 (Optional) Measure the temperatures at the joints between the DC terminals and the
connectors using a point thermometer.
----End
6.3 Setting Initialization Parameters
When starting the SUN2000 for the first time, set initialization parameters such as the system
language, system time, and power grid code on the monitoring panel.
Context
If the SUN2000 is started for the first time, follow the instructions to set the initialization
parameters. If the SUN2000 is not started for the first time, the startup detection screen is
displayed.
Before setting initialization parameters, ensure that the power-on operation in 6.2 Powering
On the SUN2000 has been completed.
Procedure

The following table lists the procedure for setting initialization parameters. The
parameter values in the figures are for reference only.
LCD Screen
Procedure
1. Start with the initialization screen displayed
while the system is loading.
The default system language is English.
2. Press to enter the Wizard screen.
To return to the default screen, press ESC. To
reset initialization parameters, choose
Settings > Wizard as Advanced User.