Huawei SUN2000-17KTL - Setting Protection Parameters

SUN2000 (8KTL-28KTL)
User Manual
7 Man-Machine Interaction
Issue 12 (2019-06-30)
Copyright © Huawei Technologies Co., Ltd.
90
LCD Screen
Procedure
5. On the Comm. Param. screen, press .
6. Set Address, Protocol, Baud Rate, and
Match Resistance, and press .

The optional addresses range from 1 to
247.

The optional protocol is modbus.

The optional baud rates are 4800bps,
9600bps, and 19200bps.

The optional parities are None, Even
parity, Odd parity.

The optional values of match resistance are
Disconnect and Connect.
This parameter is set to Disconnect by
default. If signals are distorted or the
communication is of poor quality because
of a lengthy communications cable, set the
parameter to Connect.
----End
7.2.9 Setting Protection Parameters
SUN2000 protection parameters can be set on the monitoring panel.
Procedure

The following table lists the procedure for setting protection parameters. The parameter
values in the figures are for reference only.