Huawei SUN2000-17KTL User Manual

SUN2000 (8KTL-28KTL)
User Manual
4 Installation
Issue 12 (2019-06-30)
Copyright © Huawei Technologies Co., Ltd.
18
4 Installation
Context

Do not install the SUN2000 on flammable building materials.

Do not store the SUN2000 in areas with flammable or explosive materials.
Do not install the SUN2000 in places prone to body contact because the SUN2000 shelf and
heat sinks become hot during the SUN2000 operation.
4.1 Checking Before Installation
Before unpacking, check that the outer packing is intact. After unpacking, check that the
product and accessories are intact and complete.
Checking Outer Packing Materials
Before unpacking the SUN2000, examine the outer packing for damage such as holes and
cracks. If any such damage is found, do not unpack the SUN2000 and contact the dealer
immediately.
Remove the outer packing only 24 hours before installation.
Checking the Product and Accessories
After unpacking the SUN2000, check the product and accessories. If any damage is found or
any component is missing, contact the dealer.
Figure 4-1 shows the product and accessories included in the delivery.

Huawei SUN2000-17KTL Specifications

General

Max. efficiency	98.6%
European efficiency	98.3%
Max. DC voltage	1100 V
MPPT voltage range	200 V - 1000 V
Max. input current per MPPT	26 A
Number of MPPTs	2
AC nominal power	17000 W
Operating temperature range	-25°C to +60°C
Cooling	Natural Convection
Protection rating	IP65
Max. AC power	18700 VA
Rated AC voltage	220 V / 380 V, 230 V / 400 V