Huawei SUN2000-17KTL User Manual

SUN2000 (8KTL-28KTL)
User Manual
9 SUN2000 Handling
Issue 12 (2019-06-30)
Copyright © Huawei Technologies Co., Ltd.
118
9 SUN2000 Handling
This chapter describes how to remove, pack, and dispose of the SUN2000.
9.1 SUN2000 Removal
This section describes how to remove the SUN2000.
Perform the following operations to remove the SUN2000:
1. Disconnect all cables from the SUN2000, including RS485 communications cables, DC
input power cables, AC output power cables, and PGND cables.
For details, see 8.1 Powering Off the SUN2000.
2. (Optional) Open the anti-theft lock at the bottom of the SUN2000.
3. Unmount the SUN2000 from the rear panel.
4. Unfasten the rear panel.
9.2 SUN2000 Packing
This section describes how to pack the SUN2000.

If the original packing case is available, place the SUN2000 inside the packing case and
seal it with adhesive tape.

If the original packing case is unavailable, place the SUN2000 inside a suitable hard
carton and seal it properly.
9.3 Disposing the SUN2000
This topic describes how to dispose the SUN2000.
If the SUN2000 service life has expired, dispose of the SUN2000 in accordance with local
rules for disposal of electrical equipment waste.

Huawei SUN2000-17KTL Specifications

General

Max. efficiency	98.6%
European efficiency	98.3%
Max. DC voltage	1100 V
MPPT voltage range	200 V - 1000 V
Max. input current per MPPT	26 A
Number of MPPTs	2
AC nominal power	17000 W
Operating temperature range	-25°C to +60°C
Cooling	Natural Convection
Protection rating	IP65
Max. AC power	18700 VA
Rated AC voltage	220 V / 380 V, 230 V / 400 V