Figure A-2 Installing a tray
Step 2 Place the Y-branch connectors on the tray.
Figure A-3 Placing Y-branch connectors
----End
Method 2: Using a Beam
Prepare a beam based on the base size of the solar inverter and the cabling of the
Y-branch connectors.
● Material: outdoor corrosion-resistant material
● Bearing capacity: ≥ 10 kg
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1)
User Manual A Securing Y-Branch Connectors
Issue 19 (2023-12-20) Copyright © Huawei Technologies Co., Ltd. 106
To Next Page
Loading...
Need help?
General