5 Electrical Connections
5.1 Precautions
When exposed to sunlight, the PV arrays supply DC voltage to the inverter. Before
connecting cables, ensure that all DC SWITCH on the inverter are OFF. Otherwise,
the high voltage of the inverter may result in electric shocks.
● The site must be equipped with qualied re ghting facilities, such as re sand
and carbon dioxide re extinguishers.
● Wear personal protective equipment and use dedicated insulated tools to avoid
electric shocks or short circuits.
● The equipment damage caused by incorrect cable connections is beyond the
warranty scope.
● Only certied electrician can perform electrical terminations.
● Operation personnel must wear PPE when connecting cables.
● Before connecting cables to ports, leave enough slack to reduce the tension on
the cables and prevent poor cable connections.
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1)
User Manual 5 Electrical Connections
Issue 19 (2023-12-20) Copyright © Huawei Technologies Co., Ltd. 40
To Next Page
Loading...
Need help?
General