Huawei SUN2000-185KTL-INH0 - Page 120

N
o.
Parameter Description Remark
s
4 PV string N
access type
NOTE
N is the DC input
terminal number
of the inverter.
Set this parameter based on the type of the
PV string connected to DC input terminal N
of the inverter. Currently, the options are as
follows: Automatic identication (default
value), Disconnection, Single PV string,
and 2 in 1.
You are advised to retain the default value.
If the value is incorrectly set, the PV string
access type may be incorrectly identied
and alarms may be generated by mistake
for the PV string connection status.
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1)
User Manual B String Access Detection
Issue 19 (2023-12-20) Copyright © Huawei Technologies Co., Ltd. 110