Huawei SUN2000-23KTL - Page 103

SUN2000 (8KTL-28KTL)
User Manual
7 LCD
Issue 07 (2014-07-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
97
LCD
Operation Procedure
1. On the default page, press to enter the
main menu.
2. Choose and press .
3. Enter the user name and password by
pressing or , and press .
NOTE

The user name can be set to Common User,
Advanced User, and Special User. The initial
password for Common User, Advanced User,
and Special User is 000001. If you forget the
password, contact Huawei technical support for
a dynamic password that is effective only on the
current day. Change the password after login.

After the authentication is successful, the
system keeps the authentication information for
30 seconds. If you exit from the Settings page
and log in again within 30 seconds, no
authentication is required.
Log in to the SUN2000 as Advanced
User.
4. Choose Power-On/Off, and press .

If you want to enable manual power-on, go
to step 5.

If you want to enable manual power-off, go
to step 6.