Huawei SUN2000-23KTL - Setting Initialization Parameters

SUN2000 (8KTL-28KTL)
User Manual
6 System Operation
Issue 07 (2014-07-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65
Step 3 (Optional) Measure the temperatures at the joints between the DC terminals and the
connectors by using a point thermometer.
----End
6.3 Setting Initialization Parameters
When starting the SUN2000 for the first time, set initialization parameters on the monitoring
panel. The initialization parameters include the system language, system time, and power grid
standard code.
Context
If the SUN2000 is started for the first time, set the initialization parameters by referring to this section. If
the SUN2000 is not started for the first time, it will enter the startup detection page.
Procedure

The following table describes the process for setting initialization parameters. The
parameter values in the figures are for reference only.
LCD
Operation Procedure
1. After startup, the SUN2000 enters the
initialization page.
The default system language is English.
2. Press to enter the Wizard page.
To return to the default page, press ESC. To
reset initialization parameters in the future,
choose Settings > Wizard as Advanced User.