SUN2000 (8KTL-28KTL)
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-5 Moving the SUN2000 (1)
Figure 4-6 Moving the SUN2000 (2)
Step 2 Lift the SUN2000 from the packing case and move it to the installation position.
To prevent device damage and personal injury, keep balance when moving the SUN2000
because the SUN2000 is heavy.
Do not put the SUN2000 with its wiring terminals contacting the floor because the power
ports and signal ports are not designed to support the weight of the SUN2000. Place the
SUN2000 horizontally.
When placing the SUN2000 on the floor, put foam or paper under the SUN2000 to protect
its shell.
----End
4.5 Support-mounting the SUN2000
Before installing the SUN2000, secure the shipped rear panel to the support. Then secure the
SUN2000 to the rear panel using hexagon screws.
To Next Page
Loading...
Need help?
General