SUN2000 (8KTL-28KTL)
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3. After selecting a display language, click
.
The pages will be displayed in the selected
language.
4. After setting the correct date and time, click
.
To select the parameter, click . To set
the parameter value, set or .
The date is displayed in the format of
YYYY-MM-DD. The time is displayed in
the format of hh-mm-ss. in which hh, mm,
and ss stand for hour, minute, and second
respectively.
5. After setting the power grid standard code,
click .
To select a power grid standard code, click
or .
NOTE
When the illumination is weak, the grid code
cannot be successfully set. Wait until the
illumination becomes sufficient, log in to the
system as Advanced User , and choose
Settings > Init Wizard to set the grid code.
The SUN2000-28KTL applies only to the
medium-voltage grid-feeding scenarios. The
power grid standard codes supported are the
China medium-voltage grid standard code,
Germany medium-voltage grid standard code,
and user-defined medium-voltage grid standard
code.
6. On the Finished page, click .
To Next Page
Loading...
