Huawei SUN2000-23KTL - Page 18

SUN2000 (8KTL-28KTL)
User Manual
2 Overview
Issue 07 (2014-07-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12
Figure 2-7 Default page
(1) Energy
yield
histogram
Allows you to view the energy yield data within 24 hours.
(2) Energy
yield data

Allows you to view the date and time.

Allows you to view the general energy yield data from 0:00 to the
current time.

Allows you to view the total energy yield data from the startup time to
the current time.
(3) Power
flow diagram

Allows you to view the number of PV string inputs.
The six boxes under the PV module stand for the number of PV string
inputs. where
− The box filled with a cross indicates that the corresponding PV
string is not connected or its power is low.
− The box filled with white or black indicates that the corresponding
PV string works properly.

Allows you to view the power flow from the PV strings to the
SUN2000 and view the voltage and current of each input.

Allows you to view the power flow from the SUN2000 to the power
grid and view the voltage and current of each output.
− For the SUN2000-8KTL to SUN2000-23KTL, displays the effective
values of the phase voltage and phase current of the SUN2000
three-phase output.
− For the SUN2000-24.5KTL, and SUN2000-28KTL, displays the
effective values of the line voltage and line current.
NOTE
The system displays the voltage and current of the route corresponding to the box
filled with black and switches between the connected PV strings every 10 seconds.
You can also perform manual switching by clicking and .
(4)
Output/Peak
power
Allows you to view the output power and peak power of the SUN2000.

Figure 2-8 shows the displayed page when the sunlight does not meet the conditions for
the startup of the SUN2000.