Huawei SUN2000-50KTL-JPM0 - SUN2000 Mounting Procedure

SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
4 Installation
Issue 01 (2018-09-30)
Copyright © Huawei Technologies Co., Ltd.
27
Figure 4-15 Taking out a SUN2000
To prevent device damage and personal injury, keep balance when moving the SUN2000
because it is heavy.

Move the SUN2000 with the help of other three persons or using an appropriate
transportation tool.

Do not use the ports and wiring terminals at the bottom to support any weight of the
SUN2000.

When you need to temporarily place the SUN2000 on the ground, use foam, paper, or
other protection material to prevent damage to its enclosure.
Procedure
Step 1 If you can mount the SUN2000 onto the mounting bracket directly, go to Step 3 and then Step
5.
Step 2 If you cannot mount the SUN2000 onto the mounting bracket directly, go to Step 3 and then
Step 6.
Step 3 Lift the SUN2000 and turn it upright.
To prevent device damage and personal injury, keep balance when raising the SUN2000
because it is heavy.
Step 4 Run a lifting sling through the lifting eyes of the SUN2000.