Huawei SUN2000-8KTL-M0 - Installation; Checking before Installation; Tools

SUN2000-(12KTL, 15KTL, 17KTL, 20KTL)-M0
User Manual
4 Installation
Issue 03 (2019-07-19)
Copyright © Huawei Technologies Co., Ltd.
15
4 Installation
4.1 Checking Before Installation
Outer Packing Materials
Before unpacking the inverter, check the outer packing materials for damage, such as holes
and cracks, and check the inverter model. If any damage is found or the inverter model is not
what you requested, do not unpack the package and contact your supplier as soon as possible.
You are advised to remove the packing materials within 24 hours before installing the inverter.
Package Contents
After unpacking the inverter, check that the contents are intact and complete. If any damage is
found or any component is missing, contact your supplier.
For details about the number of contents, see the Packing List in the packing case.
4.2 Tools
Type
Tool
Installation
Tools
Hammer drill
Drill bit: Φ8
mm and Φ6
mm
Socket wrench
set
Torque
screwdriver
Phillips head:
M3
Diagonal pliers