Huawei SUN2000-8KTL-M0 - Page 90

SUN2000-(12KTL, 15KTL, 17KTL, 20KTL)-M0
User Manual
C Setting Export Limitation Parameters
Issue 03 (2019-07-19)
Copyright © Huawei Technologies Co., Ltd.
84
Parameter
Value Range
Description
Control mode

Not restricted

Grid connected with zero
power

Power-limited grid
connected

If this parameter is set to
Not restricted, the
SUN2000 output power
is not limited. The
SUN2000 can export its
rated power to the power
grid.

If this parameter is set to
Grid connection with
zero power and the
SUN2000 is connected
to a power meter, the
output power of the
SUN2000 is supplied
only to the local load,
but not the power grid.

If this parameter is set to
Power-limited grid
connection and the
SUN2000 is connected
to a Smart power sensor,
the SUN2000 supplies
power limited based on
the setting of Grid-tied
Point Power to the
power grid.
Closed-loop controller

External controller

Inverter

Set this parameter to
External controller
when the
SmartLogger1000A is
connected.

If multiple inverters are
cascaded, set this
parameter to External
controller.

If a single inverter is
used, set this parameter
to Inverter.
----End
Scenario 2: Multiple Inverters + SmartLogger1000A
See the SmartLogger1000A User Manual.