Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 7-36 Adjusting total energy yield
Adjusting total energy yield: Specifies the initial value of inverter energy yield. This
parameter is used in SUN2000 replacement scenarios. Set the initial energy yield of the new
SUN2000 to the total energy yield of the old SUN2000 to ensure continuity of cumulative
energy yield statistics.
----End
7.4.3.10 Restarting the SUN2000
Procedure
Step 1 On the Operation console screen, choose Device maint > Restart to restart the SUN2000
To restart the SUN2000, you need to re-enter the password.
To Next Page
Loading...
Need help?
General