Huawei SUN2000 User Manual

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
7 Operations on the Local FusionHome App
Issue 01 (2018-05-21)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
88
Figure 7-25 Energy control
7.4.3.4.1 Grid-tied Point Control
Procedure
Step 1 On the Operation console screen, choose Device maint > Energy control > Grid-tied point
control and perform the required operation.
Figure 7-26 Grid-tied point control
Table 7-4 Description of control mode parameters
Parameter
Description
Value Range
Control mode
If this parameter is set to
Default, the SUN2000
output power is not limited.
The SUN2000 can export its
rated power to the power
grid.
If this parameter is set to
Grid connection with zero
power and the SUN2000 is
connected to a power meter,
the output power of the
SUN2000 is supplied only
to the local load, but not the
power grid.
If this parameter is set to
Power-limited Grid

Default

Grid connection with
zero power

Power-limited Grid
Connection

Huawei SUN2000 Specifications

General

Model	SUN2000
Efficiency	Up to 98.6%
MPPT	Yes
Max Input Voltage	1100V
Number of MPPTs	2
Operating Temperature	-25°C to +60°C
Protection Level	IP65
Communication	RS485
Nominal Output Voltage	230V/400V