Huawei SUN2000 User Manual

SUN2000-(3.8KTL-11.4KTL)-USL0
User Manual
7 Operations on the Local FusionHome App
Issue 01 (2018-05-21)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
119
Parameter
Description
Value Range
Parity mode
Specifies the parity mode of
RS485 communications,
which should be the same as
the communication parity
modes of the energy meter
and battery.

No parity

Odd parity

Even parity
Comm addr
Specifies the SUN2000
address connecting to the
management system. The
address should not conflict
with the addresses of other
devices on the same bus.
[1, 247]
Configuring the Management System
1. To set the management system parameters and connect to the management system,
choose Comm config > Management system settings from the Operation console
screen.
Figure 7-50 Connecting to the management system
Table 7-16 Description of the parameters on the Connecting to the management system screen
Parameter
Description
Value Range
Domain name
Specifies the IP address or
network address used for
connecting to the
management system.
N/A

Huawei SUN2000 Specifications

General

Model	SUN2000
Efficiency	Up to 98.6%
MPPT	Yes
Max Input Voltage	1100V
Number of MPPTs	2
Operating Temperature	-25°C to +60°C
Protection Level	IP65
Communication	RS485
Nominal Output Voltage	230V/400V