Huawei TaiShan 200 Series - Page 119

● Visit the chiark website and download the PuTTY software from the homepage.
● PuTTY of an earlier version may cause server login failures. You are advised to use
PuTTY of the latest version.
Procedure
Step 1 Set an IP address and a subnet mask or add route information for the PC to
communicate with the server.
On the PC command-line interface (CLI), run the following command to check
whether the IP address is reachable:
Ping
Server IP address
● If yes, go to Step 2.
● If no, check the network connection, rectify the fault, and go to Step 1.
Step 2 Double-click PuTTY.exe.
The PuTTY
Conguration window is displayed, as shown in Figure 8-19.
Figure 8-19 PuTTY
Conguration window
Step 3 In the navigation tree, choose Session.
Step 4 Set the login parameters.
TaiShan 200 Server
User Guide (Model 2280) 8 Common Operations
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 112