Figure 5-46 Boot screen
The server supports only the UEFI boot mode. The boot mode is still UEFI even if you run
the IPMI command to switch to the legacy mode successfully.
Step 2 Select Boot Type Order and press Enter.
The Boot Type Order screen is displayed.
The default boot sequence is Hard Disk Drive > CD or DVD-ROM Drive > PXE > Others.
Step 3 Select a boot option and press "+" or "-" to change the boot order.
● Press "+" to move a boot option up.
● Press "-" to move a boot option down.
The server will boot in the order displayed.
Step 4 Press F10.
The Save Conguration&Exit dialog box is displayed.
Step 5 Select Yes and press Enter.
----End
TaiShan 200 Server
User Guide (Model 2280) 5 Install and Congure
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 86
To Next Page
Loading...
