Huawei UPSJZ-T Series - Page 73

Alarm ID Cause ID Name Severity Clearance
Mode
Trigger
Condition
Impact
on the
System
Solution
66 2 Output
overload
Minor The alarm
is
automatic
ally
cleared.
The
bypass
output
load is
more
than
110% of
the rated
load.
This
alarm
does not
aect the
power
supply.
Possible
cause:
The load
exceeds
the rated
loading
capacity
of the
bypass.
Measure:
Lower the
load or
replace
the UPS
with a
larger-
capacity
UPS.
UPSJZ-T-(1 kVA–3 kVA)
User Manual 4 Control Panel
2022-08-15 68