30
For example, if you need to use the WS550 in different network environments always, you can
configure the relevant parameters in these network environments and back up them carefully.
If you want to change the network environment later, you can import the configuration file
directly to restore the default configuration without any configuration again.
Restoring Default Settings
Using the Configuration Tool
If the WS550 parameter settings were configured incorrectly, log in to the web management
page to reload the default configuration file and restore the WS550 to its default settings.
Perform this operation with caution. After the WS550 is restored, all custom data and settings
will be lost.
1. Log in to the web management page.
2. Choose Maintain tab.
3. In the navigation tree, choose Device Management.
4. Select Factory Restore configuration page.
5. Click Restore.
6. In the displayed dialog box, click OK.
Please save the WS550's configuration file and remember its storage location for necessary.