26
5. Configure the WDS function of the WS550 (B).
a. Log in to the web management page.
b. Choose Home Network tab.
c. In the navigation tree, choose WDS Bridge.
d. Select 2.4 GHz Frequency Band configuration page.
e. Set Enable to Enable.
f. In Remote bridge MAC address, enter the wireless MAC address of other WS550.
g. Click Save.
Turning On Smart Coverage
Your WS550 supports smart coverage. When you have multiple Huawei devices that support
smart coverage in your home, such as Huawei wireless routers or the wireless range extenders,
you can enable the smart coverage function on all these devices to enable them to synchronize
their wireless settings and form one large wireless network. This means your devices will
automatically connect to the strongest wireless network whether you're in the living room, study,
or bedroom -- the full benefits of a smart connected home.
1. Log in to the web management page.
2. Choose Home Network tab.
3. In the navigation tree, choose WLAN Settings.
4. Select Smart Coverage configuration page.
5. Select the Enable smart coverage check box.
6. Click Save.
Please ensure that the WS550 (A) has its WDS server disabled.
You can also click Scan
, then the wireless MAC address in the list of scanned wireless LAN, and
then add it.
To Next Page
Loading...
