11
Logging In to the Web Management Page
The WS550 provides an intuitive web management page where you can view or set the WS550
parameters.
1. Open a browser. In the address box, enter 192.168.3.1. Press Enter.
2. Enter the login password. Click Log in.
Setting Network Access Parameters
If this is your first time logging in to the WS550's web management page, you can quickly set its
network connection parameters. If you need to configure the WS550 after that, use the
configuration wizard on the web management page.
1. Log in to the web management page.
2. Choose Home > Start Wizard. Select your Internet connection mode.
Refer to the following table to configure the network connection.
Before you log in to the WS550 web management page, ensure that the computer used for the
login is connected t
o the WS550 and has been configured to automatically obtain an IP address
or assigned with a static IP address.
To Next Page
Loading...
