15
4 Wireless Connection Setup
Setting Up a Wireless Connection Using the WPS
Button
Push the WPS button once to quickly set up a wireless connection between the WS550 and any
WPS-capable device.
Before you set up a wireless connection using the WPS button, the wireless device (laptop, tablet,
or mobile phone) to connect to the WS550 is WPS-capable.
1. Press the WPS button on the wireless device to start WPS negotiation. For details, see the
user guide for the wireless device.
2. Within 2 minutes, press and hold the WPS/Reset button on the WS550 for 1 second or more.
The WPS indicator blinks.
When the WPS indicator on the WS550 is steady on, a connection between the WS550 and
wireless device is set up. The WPS indicator is on for 300 seconds.
Manually Setting Up a Wireless Connection
The wireless configuration software provided by Windows is used as an example to describe
how to set up a wireless connection.
Before setting up a wireless connection, record the WLAN name and password of the WS550.
On Windows 7
1. Click in the lower right corner of your desktop.
For the WS550's default Wi-Fi network name, check the nameplate at its bottom. By default,
the WS550's Wi-Fi network is not password protected.
To Next Page
Loading...
Need help?
General
