EasyManua.ls Logo

Huber 705 - Disposal

Default Icon
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shutting down
OPERATION MANUAL Chapter 8
Unistat® V2.0.0en/09.06.16//15.09
94
Transport using the lugs, if fitted, on the top of the temperature control unit. Do not transport the
temperature control unit alone and without aids.
Always use the original packaging for transport.
Always transport the temperature control unit upright on a pallet!
Protect attachments from damage during transport!
During transport, place the temperature control unit on squared timber to protect the cas-
tors/feet.
Secure with tensioning belts/lashing straps rated for the weight concerned.
Additionally secure (depending on model) with plastic film, cardboard and straps.
For temperature control units with transportation lock, strictly observe on page 25 the section
»Transportation lock«.
8.7 Disposal
Uncontrolled or incorrect opening of the coolant circuit
RISK OF INJURY AND ENVIRONMENTAL DAMAGE
Work on the coolant circuit and disposal of the refrigerant must be carried out by approved
refrigeration/air-conditioning system contractors.
Also see page 19, section »Temperature control units with fluorinated greenhouse ga-
ses/refrigerants«.
Improper disposal
ENVIRONMENTAL DAMAGE
Spilled/leaked thermofluid must be disposed of immediately and properly. Follow the instruc-
tions on page 16, section »Proper disposal of resources and consumables« for the disposal of
thermofluid and material.
To avoid environmental damage, have “old” temperature control units disposed of exclusively
by approved waste management companies (e.g. refrigeration and air conditioning compa-
nies).
Also see page 19, section »Temperature control units with fluorinated greenhouse ga-
ses/refrigerants«.
Huber temperature control units and Huber accessories are made of high quality, recyclable materi-
als. For example: Stainless steel 1.4301 / 1.4401 (V2A), copper, nickel, FKM, Perbunan, NBR, ceram-
ic, carbon, Al-Oxid, red brass, brass, nickel-plated brass and silver solder. Proper recycling of the
temperature control unit and accessories can actively help reduce CO
2
emissions in the production
of these materials. Follow the laws and regulations of your jurisdiction when disposing material.
Pallet with squared
timber for free-
standing units

Table of Contents

Related product manuals