Function description
Chapter 3 OPERATION MANUAL
V2.0.0en/09.06.16//15.09 Unistat®
Tap on the temperature format set by you in the controller (green text).
Enter the displayed red safety code using the numeric keypad that appears.
Enter the value 45 °C for the “Exp. vessel OT value” using the numeric keypad that appears.
Confirm your entry by tapping on “OK”. The message “Restart system!” appears on the
>Touchscreen< [88].
Switch off the temperature control unit. The temperature control unit is reset.
To Next Page
Loading...
