Hunter Douglas Luminette PowerGlide 2.1 User Manual

INSTALLATION
12
Bracket Locations — Corner and Bay Windows
■ For bracket placement, mount the installation brackets 8" from the corner for the Classic
3
1
/ 2 " vane size and 9" from the corner for the Quintette
®
4
3
/ 4 " vane size.
Important: The ends of the headrails should be located 3" from the corner for the
Classic 3
1
/ 2 ” vane size and 4" from the corner for the Quintette 4
3
/ 4 ” vane size.
➤ If additional spacer blocks or extension brackets are used, the installation brackets must
be moved further away from the corner by the amount of added clearance.
■ For bay windows, treat the center system as a corner system on both ends of the headrail.
Important: For the most reliable operation, the motor-side bracket needs to be close
(
3
/ 4 " or less) to the motor.
Classic 3½" Vane Size
8"
3"
Motor
End
Motor
End
Brackets
5"
(ends of headrails
located 3" from corner)
Quintette 4¾" Vane Size
(ends of headrails
located 4" from corner)
8"
5"
9"
4"
Motor
End
Motor
End
Brackets
5"
9"
5"

Hunter Douglas Luminette PowerGlide 2.1 Specifications

General

Brand	Hunter Douglas
Model	Luminette PowerGlide 2.1
Category	Accessories
Language	English