Setting Station Run Time Duration 21
Changing Seasonal Adjust 22
Using the Global Setting 22
Using a Program Specific Setting (set Season Adjust by Program) 22
Timed Delay between Stations 22
Setting Days to Water 22
Set Days to Water 22
Day of the Week Watering 23
Interval Watering 23
Odd/Even Watering 23
Setting Pump and Master Valve Operation 23
Set Pump and Master Valve Operation 24
Changing from Normally Closed to Normally On and Location of P/MV 24
Setting Station Cycle and Soak Durations 24
Set Station Cycle and Soak Durations 24
Cycle and Soak Summary 24
SETTING FLOW MONITORING 25
Step 1: Select The Flow Sensor 25
Step 2: Viewing Real-Time Flow 26
Step 3: Preparing for Flow Learning 27
Step 4: Learning the Flow 27
Step 5: Review And Edit Flow 28
Flow Alarms 28
Alarm Logs 29
Tips on Flow Alarms 30
SETTING CLIK™ SENSOR OPERATION 30
Set Sensor Operation 31
SENSOR ALARMS (CLIK SENSORS SEN 1–4 ONLY) 32
Clear Message 32
Sensor Locations 33
Sensor Locations 35
SETTING PROGRAM OVERLAP OPTIONS 36
Option One: Stack or Overlap 36
Option Two: SmartStack™ 36
Option Three: SSG/SmartStack™ 36
Set Station & Program Names 37
Assign Contact Information 37
DATA HISTORY 38
Name a Program (Up to 12 Characters and Spaces) 38
Name a Station (Up to 12 Characters and Spaces) 38
View Flow Totals 38
View Alarm Logs 38
View Controller Logs 39
To Next Page
Loading...
