1
INTRODUCTION
The ACC controller, in its many modular configurations, is Hunter’s premium industrial-grade controller for high-per-
formance irrigation control. Its primary purpose is to operate 24 VAC irrigation solenoids or low-draw solid state relays
for specific durations at specific times. It can also be connected to various sensors, providing automatic shutdown and
notification in case of emergencies, and actual flow records and responses in real time.
With plug-in Com and other modules, the ACC can also communicate with a computerized central control system via
hardwired cable, radio, dial-up telephone, or cellular modem. ACC is also prewired to accept Hunter wireless remote
controls.
• This product should not be used for anything other than what is described in this document.
• This product should only be serviced by trained and authorized personnel.
• This product is designed for continuous outdoor use above sea level to 15,000 feet/4.5 km at temperatures 32–122˚ F.
• These units have an IPX4 rating.
• This controller is not intended for use by young children or infirm persons without supervision; young children
should be supervised to ensure that they do not play with the appliance.
• Hunter Technical Support: 1 (800) 733-2823
To Next Page
Loading...
Need help?
General
