Hunter PRO-C PC Series

26
SETTING STATION RUN TIMES
1. Turn the dial to the RUN TIMES position.
2. The display will show the last program selected (A, B, or C)
the station number selected, and the run time for that
station will be flashing. You can switch to another program by
pressing the PRG button.
3. Use the + and - buttons to change the station run time
on the display. You may set station run times from 1 minute to
6 hours.
4. Press the→button to advance to the next station.
5. Repeat steps 2 and 3 for each station.