7
Setting Watering Start Times
1. Push the button until the Start Times icon is
displayed.
2. Use the or button to change the start time. (The
start times advance in 15 minute increments) Hold either
button down for 1 second to change times rapidly.
3. Press the
button to select the next start time (up to 9
start times are available).
Eliminating a Start Time
With the display in the watering Start Time mode, push the
or button until you reach 12:00 AM (midnight). From
here push the button once to reach the OFF position.
NOTE: If the SVC has all 9 start times turned
off, then the controller is off.
Setting the Run Time (Length of Watering)
1. Press the button until the Run Time icon is dis-
played.
2. The display will show the last run time entered.
3. Use the
or button to change the station run time
on the display from 1 minute to 4 hours.
Setting Days to Water
1. Push the button until the Water Days icon is
displayed.
2. The controller will display seven days of the week with a
icon or a icon above the numbered day. The icon
would represent an “On” water day, while the icon
would represent an “Off” watering day.
Selecting Specifi c Days of the Week to Water
1. With the cursor on a specific day (the cursor always
starts with 1), press the button to activate a particu-
lar day of the week to water. Press the button to
cancel watering for that day. After pressing a button the
cursor automatically advances to the next day.
2. Repeat step 1 until all desired days have been selected.
The selected days will show with a to indicate their
status ON. The last is the last watering day for the
program.
LIT-354 SVC Owners Manual.RevA 7 3/21/02, 1:53:35 PM
To Next Page
Loading...
Need help?
General
