Hunter SRR - Typical Installation Scenarios; Receiver Mounted Indoors; Temporary Receiver Connection

8
Hunter
Controller
Field Wiring
Conduit
Receiver
Field Wiring
Conduit to
Va
lves
Transmitter
U
p
to
450'
Weather Resistant
SmartPort
®
Cover
Receiver Mounted Indoors
This installation is ideal for situations when the SRR
system will be left permanently connected to the
controller in an indoor area.
Connection of Receiver on a Temporary Basis
from Outside of a Garage or Building
This installation is ideal for situations where a
contractor desires the ability to access and operate
a controller from outside of a locked building or
garage. However, the SRR receiver must be removed
from the SmartPort
®
and the weather resistant cap
placed back on the outlet after each use.
To Controller
TYPICAL INSTALLATION ...................................................................