CARE
27
Wrinkle and Crease Removal
The steaming methods described below can be used to help minimize hard wrinkles or creases.
Hand Method
■ Rotate vanes to the fully opened position.
■ Apply warm distilled or bottled water to a clean, white cloth.
■ Support the fabric from behind using another clean, dry cloth.
■ Blot the wrinkle or creased area with the wet cloth.
■ Let the area air dry.
Steam Machine Method
■ Rotate vanes to the fully opened position.
■ Steam from the back side of the fabric whenever possible. Set the steamer to its lowest
possible setting, not to exceed 212° F (100° C).
■ The steaming unit should never directly touch the fabric. Hold the wand 2" to 3" away from
the fabric.
■ Use slow, continuous vertical movements. Begin at the top of the fabric and work your
way down.
■ Let the area air dry.
A Note About Textiles
As with all textiles, Luminette
®
fabrics are subject to some variations.
■ The fabric will change as its position changes.
■ Minor wrinkles, puckers, or other variations can appear and are inherent to this textile
product.
■ Such variations, like those just mentioned, are normal, acceptable quality.
Additional Product Enhancements
■ Luminette face fabric is available by the yard in widths up to 123", for creating such
accessories as top and side treatments, specialty shapes, table rounds, and bed skirts.
■ Add coordinating Silhouette
®
window shadings, Pirouette
®
window shadings, and Vignette
®
Modern Roman Shades where applicable. The Whole House Solution
™
program lists
coordinating colors to make it easy to order these window fashions for installation in the
same room with Luminette fabrics. Contact your dealer for additional information.
To Next Page
Loading...
