Huntleigh dopplex ABIlity - Setting Patient Type; Fitting the Cuffs

26
Operation
12.4.2 Setting Patient Type
1. Press .
11/03/08 14:34
2. Press to select patient normal or amputee mode. Press
to Confi rm.
3. Press
to progress to cuff placement screen.
12.4.3 Fitting the Cuffs
1. Position the cuffs on the patient.
CAUTION: Ensure all cuffs are fi tted correctly and aligned on
limbs according to the instructions. Measurement error may occur
if cuffs are fi tted incorrectly.
Please Note! For clarity purposes, the following illustrations show limbs
un-clothed. Cuffs can be fi tted and measurements taken over thin clothing
such as tights, thin shirts and thin socks. Cuffs cannot be fi tted over
jumpers or trousers.