43
Accessories
16.2 Roll Stand
A roll stand is available which provides a stable means of support, and a
convenient means of moving the unit around within the building.
Fitting the Ability Unit to the Roll Stand
The roll stand support incorporates a slide mount that allows the unit to be fi tted
and removed safely and quickly.
Note: To use the roll stand, a mounting plate (Part No ACC-VAS-012) is required
to be fi tted to the base of the Ability unit.
Mounting Plate
1. With the mounting plate fi tted to the ability unit, slide the unit
sideways, ensuring that the plate is aligned with the grooves in the
roll stand support surface.
Slide Unit Sideways onto the
roll stand.
Ensure unit is fi tted in the
correct orientation.
To Next Page
Loading...
