45
Accessories
Adjusting the Platform Height
The black knob on the roll stand upright must be slowly rotated anti-clockwise
whilst supporting the platform.
CAUTION: Do not allow the platform to drop, as product damage
and personal injury may result.
Lower the platform to the desired height and rotate the black knob clockwise to
lock it fi rmly into position.
CAUTION: Ensure the platform is fi rmly locked into position
before use.
Cuff Storage
The cuffs should be stored in the basket provided on the roll stand. The tubing
should be fi tted to the tubing supports located immediately beneath the support
platform.
Supports for cuff
tubing
CAUTION: Do not store other equipment in the basket.
CAUTION: Ensure the tubing is securely supported before
moving the roll stand.
Brakes
Two of the roll stand castors are fi tted with brakes. Apply
the brakes when the stand is stationary.
To Next Page
Loading...
