14 ELECTRICAL SYSTEM 87
L00252-10
– Using a coin, turn protection cap 2 all the way counterclockwise and remove it.
– Remove speedometer battery 3.
– Insert the new battery with the lettering facing up.
Speedometer battery (CR 2430) ( p. 110)
– Check the O-ring of the protection cap for correct seating.
L00253-10
– Position protection cap 2 and turn all the way clockwise using a coin.
– Press any button on the speedometer.
The speedometer is activated.
– Position the speedometer in the holder.
– Mount and tighten the screws with the washers.
Finishing work
– Install the headlight mask with the headlight. ( p. 84)
– Set kilometers or miles. ( p. 17)
– Adjust the speedometer functions. ( p. 17)
– Set the clock. ( p. 18)
To Next Page
Loading...
