Husqvarna AUTOMOWER 260 ACX - Page 117

English - 117
7. MAINTENANCE AND SERVICE
3.
Clean under the body: Inside and
outside of the drive wheels, around
the front wheel axles and the
chassis.
Solar Hybrid: also clean the solar
panel by wiping it using a damp
cloth.
260ACX: Clean the ultrasonic
sensors with a dry cloth or similar.
page 115
4.
Check the blades and screws. Operator’s
manual for
Automower
®
5.
Check the two lower front wheel
bearings.
page 115
6.
Check the rubber bellows on the
cutting height adjustment. The
rubber bellows must not be
damaged.
page 115
7.
Check the movability and function
of the collision sensors, liftsensor
and the front body suspension.
page 39
8.
Check the rubber cap on the main
switch. The rubber cap must not be
damaged.
page 94
9.
Check that the mower has the latest
edition and correct version of the
mower program.
Quick check
page 26 and
page 77
10.
Check that the two halves of the
chassis have been sealed together
properly. Remove the body and
split the chassis halves. As needed,
lubricate the two halves of the
chassis (m/2003-2009) or replace
with rubber packing (m/2010-). Also
check the contents of the chassis;
wipe off any condensation and dirt.
7.3 Sealing
the chassis
halves, page
116
11.
Make an Auto test of all
components.
page 67
12.
Check on site that docking and
charging work correct.
page 19
13.
Perform a battery check page 19
Table 10: Service diagram 220 AC, 230 ACX, Solar Hybrid and 260 ACX
No. Check/Action For
information,
see:
Replaced parts