English – 41
E
ELECTRICAL SYSTEM
F1
F2
F2
F1
Changing the headlight bulbs
Raise the hood. The headlight bulbs are secured in
the holders with bayonet sockets.
1. Fold the engine hood forward.
2. Turn the lamp holder and pull to release it.
3. The bulb is secured in the lamp holder with a
bayonet fitting. Push in and turn anticlockwise to
remove the bulb.
4. Fit the lamp holder back into place with the new
bulb.
Changing fuses
On the RB 150, 1996 models, the fuses are located
to the right underneath the tank in separate fuse
holders. On the RB 150, 1997 models, and RBH
180, the fuses are located on the tank.
• Fuse F1, 5A
• Fuse F2, 15A
1. Fold the engine hood forward.
2. Remove the fuse in question and replace with a
new one at the same rating (15A or 5A).
Eng-3 sidan 1-54 97-04-11, 15.3841
To Next Page
Loading...
