To Next Page
J
John BernardSep 9, 2025
Why is the time not correctly displayed on my Husqvarna Motorcycle?
- CChristian GarciaSep 9, 2025
If the time isn't correctly displayed, it could be due to fuse 1 being blown. Replace the fuse and then set the clock.
Why is the time not correctly displayed on my Husqvarna Motorcycle?
If the time isn't correctly displayed, it could be due to fuse 1 being blown. Replace the fuse and then set the clock.
What to do if the combination instrument shows nothing in the display on my Husqvarna Motorcycle?
If the combination instrument display is blank, check fuses 1 and 2. Replace any blown fuses and then set the clock.
General| Engine Type | Single-cylinder, 4-stroke |
|---|---|
| Displacement | 692.7 cc |
| Bore x Stroke | 105 mm x 80 mm |
| Compression Ratio | 12.7:1 |
| Fuel System | Electronic fuel injection |
| Starter | Electric |
| Transmission | 6-speed |
| Final Drive | Chain |
| Seat Height | 890 mm |
| Torque | 72 Nm |
| Front Suspension | WP APEX 43 |
| Rear Suspension | WP APEX |
| Front Brake | Brembo 320 mm disc |
| Rear Brake | Brembo 240 mm disc |
| Front Tire | 120/70-17 |
| Fuel Capacity | 12 liters |
| Power | 74 hp (55 kW) @ 7, 500 rpm |
| ABS | Bosch 9.1 MP ABS (switchable) |
| Rear Tire | 160/60-17 |
Defines the intended use and limitations of the vehicle.
Describes dangers and consequences of using the vehicle incorrectly.
Emphasizes the importance of following safety instructions.
Highlights the importance of proper service for vehicle longevity.
Essential advice before first ride and engine break-in procedures.
Essential checks, starting procedures, and moving off instructions.
Guidance on shifting, braking, traction control, and parking.
Details required maintenance tasks based on time and mileage intervals.
Instructions for adjusting fork compression and rebound damping.
Details the types of compression damping and how to adjust them.
Procedure for bleeding the fork legs.
Procedures for removing and installing the air filter.
Procedure for checking the drive chain tension.
Step-by-step guide to adjusting the drive chain tension.
Inspecting the drive chain, sprockets, and chain guide for wear.
Guides on adjusting clutch lever position and checking clutch fluid level.
Explains the ABS system, its modes, and warnings.
Guides on adjusting hand brake lever and checking brake fluid levels.
Procedures for checking brake disc thickness and front brake linings.
Steps for adding front brake fluid.
Detailed procedure for removing the front wheel.
Detailed procedure for installing the front wheel.
Step-by-step guide to removing the rear wheel.
Step-by-step guide to installing the rear wheel.
Guides on checking tire condition, tread depth, age, and pressure.
Procedure for changing the main fuse.
Instructions for changing ABS and individual consumer fuses.
Guides on checking coolant and antifreeze levels and performing related checks.
How to change between STREET and SPORT riding modes.
Guides on adjusting traction control and checking shift lever position.
Procedure for checking the engine oil level.
Procedure for changing engine oil, filter, and cleaning screens.
Instructions for adding engine oil to the correct level.
Covers issues related to starting, engine cranking, and initial running.
