6-2 SERVICE
P/N 0501930_A WWW
.HUSSMANN.COM
REPLACING FLUORESCENT LAMPS
Fluorescent lamps are furnished with moisture
resistant lamp holders, shields and end caps.
Whenever a fluorescent lamp is replaced, be
certain to reinstall the lamp shields and end caps.
The switch in the canopy controls all lamps in the
merchandiser.
REPLACING LAMP HOLDERS AND
END CAPS
The Impact Excel lamp holder is designed to
snap into the sheet metal of the case. The lamp
holder has a locking ‘nub’ which fits inside the
groove of specially designed end caps.
IMPORTANT!
Always replace lamp holders and end caps
with Hussmann lamp holders and end caps.
Use of non-Hussmann parts may result in
poor electrical contact and short lamp life.
Groove
Nub
Impact Excel
End-Cap
Impact Excel
Lamp Holder
To Next Page
Loading...
