Hyd-Mech V18 - V18 Machine Specifications; Machine Capacity Specifications; Blade, Motor, and Pump Specifications; Hydraulic, Feed, and Pressure Specifications

8.1
SECTION 8 - SPECIFICATIONS
2 HP (1.5 KW)
18"x 28"(457mm x 711mm) with 6º option
18"x18"(457mm x 457mm) with 6º cant option
17.5" (445mm) with tall vise insert option
Table Height
Feed System
38" (965mm)
variable pressure 0-300 PSI (0-2068 kPa), variable rate 0-15 in/min (0-380 mm/min)
8 US Gallons (30 Liters)
18"x 12"(457mm x 305mm) with bundling option
18"x 6"(457mm x 152mm) with bundling options
18"x 10"(457mm x 508mm) with 6º cant and bundling
14'11" (4547mm) - 16'11" ( 5157mm)
Hydraulic
Coolant
hydraulically positioned and locked
4500 lbs (2041 Kg)
30 US Gallons (114 Liters)
Blade Wheel Dia.
Blade Tension
Blade Speed
19" (483mm)
variable
carbide inserts
65 - 385 sf/min (20 - 118 m/min)
blade drive 7 1/2 HP (5.6 KW)
Blade Guides
Motors
hydraulic pump drive
hydraulically positioned and locked, full 45º left or right
Vises
Head Swing
Hydraulic
Coolant
hydraulic full stroke
Pumps
6 1/2 U.S. Gal. / min (25 Liters / min)
3 1/2 U.S. Gal. / min (13 Liters / min)
108" (2740mm) high @ 90º x 120" (3048mm) wide x 80" (2032mm) long
650 PSI (4482 kPa)
Guide Arm
Machine Weight
Overall Dimensions
System Pressure
Tank Capacity
Hydraulic
V-18 BANDSAW SPECIFICATIONS
Capacity
Blade
at 90º rectangular
at 90º rectangular
at 90º rectangular
at 90º round
at 45º rectangular
at 45º rectangular
18"x 31"(457mm x 787mm)
at 45º rectangular
18"x 21"(457mm x 533mm)
18"x 19"(457mm x 483mm) with 6º option
18"x12"(457mm x 305mm) with 6º cant option
at 90º rectangular
at 45º rectangular
1 1/4" (31.75mm)Width
at 90º rectangular
Length
V18 SPECIFICATIONS