EDS 3000 IO-Link 19
Status: 2022-07-14 HYDAC ELECTRONIC GMBH Part no.: 669897
16 Changing the Basic Settings
Note:
If no key has been pressed for approx. 60 seconds, the menu closes
automatically, and any changes that may have been made will not be saved.
17 Resetting the peak value
The pressure peak value can be reset.
In the extended functions menu, please press the key "" until "rSHL" appears.
Press "mode".
Press "" to select "YES" and confirm by pressing the "mode" key. The maximum
value is now set back.
To Next Page
