Storing ContaminationSensor
Store the CS in a clean, dry place, in the original packing, if possible. Do not remove
the packing until you are ready to install the unit.
If the CS is to be put into storage for an extended period of time, it should be
completely drained and flushed with Cleanoil to prevent it from gumming up.
After a storage period of 6 months, we recommend flushing with Cleanoil.
Properly dispose of the cleaning agents and flushing oils used.
Storage conditions
Storage temperature -40 °C to +80 °C / -40 °F to +176 °F
Relative humidity: max. 95%, non-condensing
To Next Page
Loading...
Need help?
General
